Meguiar's 5" DA Microfiber Cutting Discs

New microfiber disc technology cuts through moderate surface defects with no swirls...guaranteed*!

Engineered foam interface for optimal cutting efficiency, and controlled conformability
Optimized for use with DA Correction Compound-D300. However, it can be used with other compounds/polishes
Machine washable

Meguiar's Microfiber Cutting Disc are the premier microfiber pad on the market. Although they were originally developed to work specifically with Meguiar's D300 Microfiber Correction Compound, these microfiber cutting discs work great with any compound! When used on the Meguiar's MT300, Porter Cable 7424XP or comparable DA polisher, these pads will dramatically increase your cutting ability. They also work very well with Rupes Polishers.

The unique microfiber face of these pads is what really makes these pads aggressive. Unlike foam, where product tends to soak into the pad, microfiber pads keep your compound or polish right on the surface of the pad. This feature, when combined with the firm cutting foam interface, allows more of the abrasive in your compound to come in contact with your paint, allowing you to achieve much great cutting ability with your machine.

Must Do:

For maximum cutting at all times, clean the microfiber disc frequently and thoroughly. Use compressed air (preferred) or a pad brush
To avoid any contaminats on the disc's surface that may damage the paint - clean the pad after every section. Fibers need to look fluffy after each cleaning

Quantity: 2 discs

Pro Tip: if you use these discs with a Rupes polisher, watch for the heat build-up. Too much heat may delaminate the disc.