NEW 2020 Version! CarPro Iron-X 4L (4-pack) Very Low Odour Formula

CarPro (C.Quartz)

(No reviews yet) Write a Review
$659.96
Was: $659.96
Now: $527.97
(You save $131.99 )

Product Overview

CarPro Iron-X

CarPro Iron-X - the king of iron fallout remover!

Its advanced pH-balanced (pH-7) formula safely breaks down ferrous metallic contamination caused by automotive brakes, rail travel, and construction from delicate vehicle surfaces. It can be used on paint, plastic, chrome, glass, and alloy wheels. Iron-X works by forming a water-soluble complex with the iron particles lodged in the surface, allowing them to be rinsed free, and cleaning deeper than washing or claying alone. Iron-X is the original – and still the best – acid-free iron fallout remover.

The Iron-X Paint and wheels Decontamination System was developed as a method of removing paint contamination beyond what can be removed by washing or claying alone! If you are familiar with detail clay, you know it is capable of removing above surface contaminants that have bonded to the paint. The Iron-X is designed to remove what lies below the paint surface as well as above.

Airborne chemical compounds and ferrous particles (particles containing iron) actually penetrate the paint and create corrosive compounds that eat deep into the paint's sub-layers or paint’s pin-holes. This is a gradual process that often is not evident until it's too late. Claying does not remove the entire particle which will continue to spread beneath the surface if not dissolved.

During the use of your vehicle, brake dust and road grime become sintered to the surface of the car paint , rims and wheels due to the high temperature conditions they are normally exposed. Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals. Iron X opens up the paint's pores to release ferrous particles and to neutralize caustic compounds that have developed in the paint's subsurface. Ongoing damage is immediately stopped and future damage is prevented by removing the ferrous particles.

Iron-X sprays on as a transparent liquid. As the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple/red. The purple/red coloration is the Iron-X Cleaner forming a bond to the sintered iron on the car paint and wheel and changing its state to a water soluble complex for easy removal. Stubborn, baked on grime may take a small amount of agitation. Rinse car paint and wheels thoroughly with a power washer and wipe dry.

CarPro Iron-X is used by body shops for pre-cleaning prior to detailing and by dealerships for new and used car prep. It is proven to deliver a clean, glassy smooth vehicle that is protected from the harmful effects of paint contamination. No other is as fast and effective at removing multi-layer paint and wheels contamination.

Features:

  • Removes iron particles and prevents the spread of iron-related damage & helps to protect your vehicle from paint system failure.
  • Safe to use, acid free, and pH neutral (pH 6-7).
  • Safe to use on clear coat paint.
  • Safe to use on aluminum, chrome, alloy, or clear coated wheels.
  • Safe for use on all solid car surfaces and will not deteriorate clear coats (avoid using on fabric convertible tops).

Directions:

1. Shake the bottle.

2. You can cover the surface with Iron X by spraying it everywhere but that can be wasteful. I recommend that you spray as needed and spread it with an OPT Waffle Wash sponge or a yellow foam applicator to cover the entire surface. You may also consider using an atomizer type sprayer such as, Poly 2. In any case, evenly cover the surfaces you wish to decontaminate. The product is strong so you don’t have to be wasteful. Just make sure it contacts the entire surface.

3. Allow the product to dwell for 5 minutes in the shade. Do not allow it to dry in the sun. On light colored paints you will see the product dissolving ferrous particles as it turns color. On darker colored paints everything is happening in exactly the same way. It’s simply more difficult for you to view the color changing affect. I have read people saying the product works better on lighter colored cars but that is illogical and is not the case. It works the same regardless of car color.

4. After allowing to dwell take a damp (not soaked) OPT Waffle Wash sponge or a yellow foam applicator (or other media if you prefer) and agitate the surface.

5. Thoroughly rinse the surface.  

Quantity:

  • Four (4) 4 liter jugs of CarPro Iron-X

 

* Additional discount codes are not applicable.

 

 

 

 

 

 

Reviews

(No reviews yet) Write a Review